Black Diamond Offset Micro Stopper Review

The guidebook had only mentioned one section of offwidth on the pitch, but here I was staring at another fifteen feet of wide crack, and my 5 Camalot was far below in the first one. The climbing didn’t look too bad, but I was on sandstone, and tend to be cautious when I know a foothold could snap without warning. I looked around at my options, and they were bleak. Then I noticed a small crack in the face out right. Hmm, that might be perfect for one of these new Black Diamond Offset Nuts I was carrying …

If you don’t have offset nuts on your rack, you haven’t really lived. I was converted several years ago when I checked out the new-at-the-time DMM Offsets, which were a reinvention of the popular, but out of production, HB’s. Instantly I was hooked, as they offered myriad opportunities for placement, and regular nuts just seemed so bland and limiting after that. Those first DMM’s were only offered in the larger sizes, however, and I only picked up a couple of the smaller ones when they were released, so I was psyched to check out the new offering from Black Diamond.

The shape is a little different than the DMM’s, and they’ve used bronze, instead of brass, which reportedly helps with durability. I haven’t abused them enough to comment on this, but I trust those smart engineer guys when they tell me this is true. These nuts are being touted as the pro of choice for things like flaring cracks and pin scars, but I’ve found them to be versatile for just about any kind of rock where you’re carrying a set of nuts.

From granite cracks, to basalt and sandstone seams, they tend to work where nothing else will. The smallest sizes are recommended for aid climbing only, but I like to think of them as my “it’s OK, just put them in and keep climbing till you find something better” pieces. Also, the folks who frequent the big walls of Zion and their copious flaring pin scars will likely find them an indispensable part of their rack.

Reaching out right, I was able to slot one of the BD offsets in a perfect section of dark, varnished sandstone. It wasn’t the trucker number 5 that could have been staring me in the face, but it was enough for me to move upward with confidence, and finish off the stellar pitch.

For tech specs or to purchase, head on over to the Black Diamond website.

Disclaimer: This product was provided to SplitterChoss.com for the purpose of reviewing. Don’t worry, though, our integrity can’t be bought!

 

3 Responses to Black Diamond Offset Micro Stopper Review

  1. I haven’t tried the new BD ones, but I have a set of the old HB brassies. My advice: if you’re looking to use them for freeclimbing you are far better served by the DMM PeeNuts. The taper isn’t as sharp on the PeeNuts (better IMO), they are standard aluminum so they hold up better, and they feature a standard swage instead of soldered into the head, so the PeeNuts can withstand a few funks that tend to damage cables on soldered head RP style nuts.

    Not a knock on these nuts at all, I bet they are stellar for thin aid as the HBs are. I just believe that for freeclimbing the PeeNuts are a better tool. Thanks for the review!

    dave September 30, 2011 at 7:21 pm
    • Thanks for the feedback Dave. I’ve used the PeeNuts and dig them as well. For what it’s worth, the taper on the BD Offsets isn’t as dramatic as on the HB’s.

      BJ Sbarra September 30, 2011 at 8:30 pm
  2. Thanks for the review BJ. I’ll need to check out some offsets. I don’t have any on my rack…yet.

    Gif October 3, 2011 at 12:42 pm
Locals Corner

Bulldog Creek Dog Walk (IV WI 4+)

Hayden Carpenter and Tom Bohanon recently repeated an obscure ice climb on the south side of Mt Sopris. Given a brief mention in Jack Robert’s ice guide, Bulldog Creek Walk is described as being 100 meters of WI 4. What they found was seven pitches of ice in a remote setting that makes for one […]

Connect with Us

Real Time Web Analytics